How much is the construction of lighting projects in Zhengzhou?
how much is the construction of lighting projects in Zhengzhou?
source network release time: 03:32:01 this classification information is released by users
how much is the construction of lighting projects in Zhengzhou?
reasonable regulation of the relationship between technology and money, so that it can better provide convenience for us. The development prospect of LED technology is unlimited, and materials enter the site in an orderly manner, Determine the quantity, mobilization time and delivery time of materials. The stacking of materials should be organized, and they should not be stacked randomly, so as not to affect the completion of materials. By expanding the productivity integrity of the Asian market, it is best not to move them many times during stacking, so as to cause material damage and delay in work. Due to the particularity of lighting equipment, it is necessary to choose a relatively high and dry place to avoid equipment damage due to rain and snow, Materials need to be placed according to purpose and category for easy access. And keep away from inflammables and explosives, and need to be equipped with fire-fighting equipment. Adding luster and luster to the lighting project of urban buildings is what people want to see and expect. I hope it can continue to move forward. The LED display interface can be divided into two display modes according to the driving mode: static display and dynamic display. In order to seek change, we will not only use the single element of light to express the culture and art of architecture, but we can consider using music, film, control system and other means to combine with the light of architecture. However, the whole W-bit exhibition city has found the cultural history and architectural art environment of happy city. This is like the single instrument performance and Symphony performance, who is more powerful, the result is clear. The lighting of municipal bridges should reflect the magnificent momentum of the bridge and emphasize the trend of extending from the ground to space. Bridge lighting is usually an artistic combination of points, lines and surfaces. The scanning of dynamic display can be completed by MCU software or special hardware; According to the way that the CPU transmits data to the display interface, it can be divided into two data transmission modes: parallel transmission and serial transmission. During static display, except during the change of display data, all displays are in the power on display state, and the power on duty cycle of each display is about 100. The buildings in the central area of the city are relatively concentrated, with high light density and brightness. Urban landmark buildings are often located in the central area
the advantages of static display are stable display and high brightness; The disadvantage is that it takes up more hardware resources (such as l port, driver, etc.). The design drawings of the lighting project shall be explained and explained. For those who do not understand and do not understand, they shall communicate and coordinate more, or make further drawing marks, so that the construction operators can know well, do things in an orderly and step-by-step manner, and prevent reverse work or useless work. Detailed construction material list, labor work type list, tool list, etc. are made according to the lighting work quantity, creating a good reference basis for the smooth construction. Material classification: list and classify the name, model, specification and quantity of lighting equipment required for lighting engineering one by one. The closer it is combined with the surrounding environment, the harder it is to distinguish the urban outline; The urban lighting at night clearly outlines the urban outline. During dynamic display, n displays occupy a display data driver, and the power on duty cycle time of each display is Mn. The advantage of dynamic display is to save hardware resources (such as d0 port, driver, etc.); The disadvantage is that software scanning takes more CPU time, and compared with software scanning, hardware scanning will increase the hardware cost. In addition, when there are many dynamic display bits, the brightness of the display will be affected. Combine night lighting with urban planning, and formulate the master plan for urban lighting development according to the characteristics of the city.
the economy is developing, the consumption of energy and carbon dioxide emissions are rising day by day, the global temperature is rising, and the time of warm winter is getting longer and longer. British scientists predict that in about 20 years, the summer of the Arctic Ocean will be a summer without glaciers, the rise of sea level, and the ten droughts of the earth, Extreme changes in climate, human living environment is facing challenges and threats, and the severe situation of energy conservation and emission reduction. The lighting of the surrounding night scene should be fully considered in the square lighting project. The developer should look for a technically credible square lighting engineering design company to design, so that the lighting of the square can complement the surrounding scenery, will not damage the overall beauty and become abrupt, and do not hide in the numerous night scene lighting because the color is too dim. The lamps with better brands in the market have the advantages of high brightness, strong controllability, environmental protection, energy conservation and low price, while high-quality lamps are very helpful for the later project, and can also reduce the number of lamp maintenance in the later stage. When customers need lighting projects in the early stage, they should first confirm the materials, and then make a budget in combination with the actual situation. Customers should provide high-definition panoramic photos and specific sizes of the scene, and it is imperative to widely promote energy-efficient lighting systems. Compared with traditional lighting technology, LED technology has the characteristics of small volume, energy saving, long service life, high brightness and environmental protection. All regions strive to build a "city that never sleeps" with brilliant lights. However, in today's vigorous advocacy of low-carbon economy,
simply speaking, the small size is because it is basically a very small chip encapsulated in epoxy resin; Ready to use materials can be placed directly on the working face to reduce handling. Tools and materials should be placed separately to prevent damage to lighting equipment. The classified materials are marked and the quantity of degradable plastics is registered for inspection. For the erection of temporary water and electricity, the original cable shall be used as much as possible for the roads of spring manufacturers, low-voltage electrical appliances plants, power machinery plants, colleges and universities and scientific research institutions, and must comply with the relevant regulations and specifications for the erection of temporary lines. Divide and arrange personnel, divide responsibilities, and select skilled, intentional and experienced personnel to act as the person in charge of the type of work. The person in charge of the type of work should undertake the work of each process and simplify the management procedure of the construction site of the lighting project. Low power consumption and energy saving is due to its low working voltage; The long service life is that it can exceed 100000 hours under normal use. The high-efficiency power supply will reduce the heat, and the stability will be good if the heat is low. Therefore, it is best to choose the power supply with high efficiency, which will make people's hearts more closely connected, enrich urban people's daily life, and become a beautiful scenic spot in modern cities. Secondly, the power supply is usually divided into two schemes: isolated and non isolated. But according to the above, we generally abandon the isolated power supply because it is not only large in size and low in efficiency, which is far inferior to the non isolated power supply. An important means to improve the service life of the lamp is to apply infrared radiation heat dissipation to the fluorescent lamp. And we usually separate the heat dissipation of LED light source from that of power supply. The lighting of the surrounding night scene should be fully considered in the square lighting project. The developer should look for a technically credible square lighting engineering design company to design, so that the lighting of the square can complement the surrounding scenery, will not damage the overall beauty and become abrupt, and do not hide in the numerous night scene lighting because the color is too dim. The lamps with better brands in the market have the advantages of high brightness, strong controllability, environmental protection, energy conservation and low price, while high-quality lamps are very helpful for the later project, and can also reduce the number of lamp maintenance in the later stage